is a detector with continuously variable wavelength in the range of 190 - 800 nm (190 - 600 nm) and a noise level ± 0.5 x 10-5 AU. The unit may be used for routine analytical chromatography as well as for preparative chromatography, according to the selected cell. The unit is easy to operate, reference and sample signals are available for detector diagnostics as well as information on lamp operating hours. Output signal is available in both digital and analogue form on the output connector. It is possible to control the unit using the keypad or an RS232 interface. Connecting capillaries are led from the detector's right side panel. The detector is equipped with a high standard deuterium lamp in a special socket that enables easy changing. Wavelength can be programmatically changed during the performance of an analysis. The detector performs automatic wavelength calibration after the lamp has been switched on. A HPLC 04 analytical cell is included as a component of the detector.

is a detector with an interference filter. By means of this filter and deuterium lamp spectrum can be this unit adjusted at one fixed wavelength in range of 190 - 800 nm. Noise level at 254 nm is ± 0.5 x 10-5 AU with an empty cell. The unit may be used for routine analytical chromatography as well as for preparative chromatography, according to the selected cell. The unit is easy to operate, reference and sample signals are available for detector diagnostics as well as information on lamp operating hours. Output signal is available in both digital and analogue form on the output connector. It is possible to control the unit using the keypad or an RS232 interface.

is a new type of UV detector, which allows measuring absorbance of two wavelengths simultaneously in one cell in range 200 - 320 nm (increments 1 nm). This unit is used in liquid chromatography to verify analyzed samples by means of a second wavelength or in situations when some peaks absorb on different wavelengths. It is possible to use the detector in analytical, preparative or flash applications by using different cells. Noise level at 254 nm is ± 1 x 10-4 AU with an empty cell. The unit is easy to operate, reference and sample signals are available for detector diagnostics as well as information on lamp operating hours. Output signal is available in both digital and analogue form on the output
connector. It is possible to control the unit using the keypad, external logic signals or an RS232 interface.

This unit has the same features as the TOPAZ Dual UV Detector but it does
not have a keypad and display thus it is possible to control it by using
external logic signals or an RS232 interface only.

is an OEM build-in detector with one interference filter (FLASH 06 Single Detector) or two interference filters (FLASH 06 Dual Detector). The FLASH 06 Dual Detector makes to possible measuring of two wavelenghs simultaneously. Detector can be adjusted using interference filter at one or two fixed wavelength in range of 200 - 600 nm. Noise level at 254 nm is ± 2 x 10-5 AU with an empty cell. High standard deuterium lamp in a special socket enables easy changing. Lamp work hours are counted using the built-in counter. This unit is used in liquid chromatography in flash and preparative applications. By using analytical cell can be detector used also for analytical purpose. The cell is easy to replace from the side of the detector. The unit is designed as build-in unit with 24 V power supply and RS 232 controlling. On request can be sold in classical case with 230/115 V powering.

is an OEM build-in type of UV diode array detector (DAD), which allows
measuring absorbance of four wavelengths simultaneously in one cell just
as measuring of whole spectrum (scan). Scan of whole spectrum is
possible in each time.
This unit is used in liquid chromatography to verify analyzed samples by
means of four wavelengths or in situations when some peaks absorb on
different wavelengths. It is possible to use the detector in flash and
preparative applications. By using analytical cell can be detector used also
for analytical purpose. The cell is easy to replace from the side of the
detector.
Noise level at 254 nm is ± 5 x 10-5 AU with an empty cell.
Wavelength setting is from 200 up to 400 nm in increments of 1 nm.
Lamp work hours are counted using the built-in counter.
The unit is designed as build-in unit with 24 V power supply and RS 232
controlling. On request can be sold in classical case with 230/115 V powering.

Differential Refractive Index Detectors are used for detecting little or no UV active samples such as sugars or polymers. The Shodex RI-101, employs a number of improvements for shortening the time for stabilization. By using a micro-processor it is capable of automatic start-up from eluent replacement to checking the base-line stabilization. The detector is fitted with external input and output terminals as well as RS232C communication ports, permitting advanced automation by linking the detector with various HPLC systems, enabling advanced automation by combining the detector with various chromatographs. Main features:

• superior base line stability
• intuitive operating using
• easily overview of operational conditions and baseline trend
• automatic start-up function for reference cell filling and baseline stabilization checking
• HELP function for easy validation and calibration
• control mode (by keypad, or RS232)
• optimized temperature control method guarantee quick base line stabilization
• leak sensor stop the pump by solvent leakage
• various automated function